RV-10000A

RV-10000A

Out of stock

Finally, a cure for poor repeatability in low viscosity measurements

PDF Brochure (PDF 827KB)

PDF Manual (PDF 2.88MB)

PDF Short Guide to the Tuning Fork Vibro Rheometer: RV-10000A (PDF 1.31MB)

PDF Tuning fork vibro method as a Japan industrial standard (News flash: July 2011 / PDF 93KB)

REQUEST A QUOTE

 

 

Category:

Description

Features

  • Repeatability as high as 1% of the measured value (by S.D.) even with low viscosity sample fluids
  • Shear rate changes by controlling the sensor plate vibration amplitude
  • Easy setup/cleaning and very quick measurement (stabilization in 20 seconds)
  • Wide continuous measurement range (max. 0.3 to 25,000 mPa·s)
  • Little interference to the sample fluid
  • Possible to measure fluids in motion
  • Comes with a special controller for:

– Automatically changing the amplitude (shear rate) and capturing data in the manner set by the user
– Real-time graphing of viscosity variation with time, temperature, as well as shear rate
– Saving results (in CSV format) and graph screens (as JPEG images) in USB flash drives

 

 

 

 

 

  • User calibration function, including a simplified calibration using purified water
  • Sample fluid temperature control using the provided water jacket
  • Anti-corrosive, titanium sensor plates and temperature sensor
  • X-Y-Z stage, anti-vibration table (AD-1671A), positioning stopper, etc., as standard accessories

External Input / Output

RS-232C interface
USB (1.1) interface

Accessories

Click here to see the complete accessory list

 

 

 

 

 

 

 

 

Also available…

RV-10000Tuning Fork Vibro Rheometer (Basic Model)

 

  • Amplitude (shear rate) manually alterable to eight levels
  • Windows Communication Tools WinCT-Viscosity and a serial-USB converter provided as standard (the special controller is not available with the basic model)


Example of Measurement Display Using WinCT-Viscosity

PDF Manual (PDF 1.56MB)

 

 

    Specifications

    Main section

 

   

 

 

 

 

 

 

 

 

 

 

 

 

 

 

*1 The basic model (RV-10000) has no controller section and the sensor plate amplitude can only be altered to eight levels (0.07 / 0.1 / 0.2 / 0.4 / 0.6 / 0.8 / 1.0 / 1.2 mm) by manually pressing a key on the display unit.
*2 When the sample cup (45 ml) is used.
*3 Repetitive measurement with the sensor plates remaining in the sample fluid
*4 The value after calibration using a viscosity standard liquid at a temperature range between 20°C and 30°C with no condensation
*5 The unit switches to Pa·s.

 Controller section